| Journal Publications of Civil Engineering Department | ||||||||
| S.No | Title of paper | Name of the authors | Name of journal | Year | ISSN number | Volume | Issue | Page No. |
| 1 | Study on liquefaction of soil using cyclic load mechanism and pore pressure dissipation | Nandini Kaushik, Himanshu Vimal, Devesh Jaysawal | International Journal of Research in Civil Engineering and Technology | 2023 | E-ISSN: 2707-8272 | 4 | 1 | 30-33 |
| 2 | Stabilization of soil using geotextile | Himanshu Vimal, Nandini Kaushik, Devesh Jaysawal | International Journal of Research in Civil Engineering and Technology | 2023 | E-ISSN: 2707-8272 | 4 | 1 | 24-29 |
| 3 | Seismic Analysis of Buildings on Hilly Slopes | Arushi, Rajput Apoorvi, Solanky Kajal, Agarwal Surbhi, Awasthi Rachna, Satsangi Surat, and Yadav krishma | 46th (INTER) NATIONAL SYSTEMS CONFERENCE | 2023 | ||||
| 4 | Rammed Earth Construction Using Cement & Coir Fibers | Saurav Sharma, Surendra Kumar Sharma, Devesh Jaysawal | Journal of Research in Engineering and Applied Sciences | 2023 | ISSN:2456-6411 | 8 | 2 | 524-533 |
| 5 | Modification of bitumen using the waste plastic | Bhanvar Pal Singh, Devesh Jaysawal | Journal of Emerging Technologies and Innovative Research | 2023 | ISSN: 2349-5162 | 10 | 4 | 354-359 |
| 6 | Liquification of soil during earthquakes: Potential of soils | Ishika Mittal, Devesh Jaysawal | International Journal of Research in Civil Engineering and construction | 2023 | E-ISSN: 2707-8337 | 2 | 1 | 17-20 |
| 7 | Geotextile reinforcement in pavement design: A comprehensive analysis | Shantanu Upadhyaya, Devesh Jaysawal | International Journal of Research in Civil Engineering and construction | 2023 | E-ISSN: 2707-8337 | 2 | 1 | 21-25 |
| 8 | Ferrock material: A case study | Sakshi Agarwal, Devesh Jaysawal | International Journal of Research in Civil Engineering and Technology | 2023 | E-ISSN: 2707-8272 | 4 | 2 | 1-3 |
| 9 | Evaluating the Seismic Performance of Steel Braced Shear Walls in RC and Steel Framed Building on a Hilly Slope | Arushi and Yadav Krishma | Sustainable development of smart cities infrastructure (SDSCI-2023) | 2023 | ||||
| 10 | Effects of PM10, and PM1 during the festive season of Diwali; A study in an urban area of Agra, India | Yadav Krishma; Kumar Ranjit; Yadav Ashok | 46th (INTER) NATIONAL SYSTEMS CONFERENCE | 2023 | ||||
| 11 | Compressive Strength Analysis of Cement Stabilized Rammed Earth Block Reinforced with Jute Fibers | Pankaj Singh, Saurav Sharma, Surendra Kumar Sharma, Ravi Baghel, Tanishq, Nitin, Randeep | 46th (INTER) NATIONAL SYSTEMS CONFERENCE | 2023 | ||||
| 12 | Analysis of multiple print-head displacement mechanisms in 3D space for Material Extrusion Machine | Ishant Singhal, Bobby Tyagi, Abhishek Raj, Akash Jain, Shashank Kapoor, Ankit Sahai1, Rahul Swarup Sharma | 3D Printing and Additive Manufacturing | 2023 | ||||
| 13 | Analysis of Liquifaction Potential of soil using SPT Data: field Assessment | Pravindra Singh Bhan | JETIR | 2023 | ||||
| 14 | A study of blockchain technology for secure and transparent record keeping | Tushar Gupta, Devesh Jaysawal | TIJER Technix International Journal for Engineering Research | 2023 | ISSN 2349-9249 | 10 | 7 | 314-317 |
| 15 | A review on Phase Change Materials in Building Construction | Mohd Sharique Ahmad, Rajat Gupta, Harsh Vardhan, Harshita bhardwaj, Priya kain | International Journal of Scientific Reasearch in Engineering and Management | 2023 | 2582-3930 | 7 | 5 | |
| 16 | Water Demand Assessment: a case study of cantoment area Agra | Rajat Diwakar, Raghvendra Singh, Kamini Yadav, Shivam Dhakre, Devesh Jaysawal |
International Journal for Research in Engineering Application & Management (IJREAM) | 2022 | ISSN : 2454-9150 | 8 | 2 | 271-275 |
| 17 | Use of Satellite Remote Sensing and GIS for extraction of Digital Elevation Models using Open source data products and software: Case studies | Savitri Seetal.Mantripragada, Dr. Thatiparthi Vijaya Laxmi, Jinshad Uppukoden | Technix International Journal for Engineering Research | 2022 | ISSN No. 2349-9249 | 9 | 8 | |
| 18 | Traffic Assessment of an Intersection and its signal design using Webster's Model: A case study of Ghatia. Azam Khan Intersection in Agra city | Devesh Jaysawal, Shikhar Verma, Saurav Nigam | TIJER Technix International Journal for Engineering Research | 2022 | ISSN 2349-9249 | 9 | 7 | 52-62 |
| 19 | Toward an Improved Understanding for Design of Material Extrusion Additive Manufacturing Process‐ Based 3D Printers-a Computational Study | Ishant Singhal, Bobby Tyagi, Riya Chowdhary, Ankit Sahai, Haniyeh Fayazfar, Rahul Swarup Sharma | Advanced Theory & Simulation | 2022 | ||||
| 20 | Rejuvenation of Guru ka Taal, Agra: Issues, Challenges and Strategy | Devesh Jaysawal, Sahil Srivastava, Shantanu Upadhyaya, Sakshi Agarwal, Ishika Mittal, Rishabh Kumar Singh, Himanshu Vimal | SSRG International Journal of Civil Engineering | 2022 | ISSN: 2348-8352 | 9 | 8 | 29-35 |
| 21 | Level of Service (LOS) for Urban Road – A Case Study at Etah Road | Siddhant Jain, Devesh Jaysawal | Journal of Emerging Technologies and Innovative Research | 2022 | ISSN: 2349-5162 | 9 | 5 | 224-229 |
| 22 | LAND USE PATTERN USING SEMIAUTOMATIC CLASSIFICATION PLUGIN (SCP) WITH OPEN SOURCE DATA |
Savitri Seetal.MantriPragada, Devesh Jaysawal | International Journal of Engineering Applied Sciences and Technology | 2022 | ISSN No. 2455-2143 | 6 | 12 | 235-240 |
| 23 | Improvement in subgrade soil of flexible pavement using Geosynthetics | Shubhanshu Gupta, Devesh Jaysawal | Journal of Emerging Technologies and Innovative Research | 2022 | ISSN: 2349-5162 | 9 | 5 | 633-636 |
| 24 | Carbon Fiber As Construction Material | Km Shubhangi , Devesh Jaysawal | International Journal of Engineering Applied Sciences and Technology | 2022 | ISSN No. 2455-2143 | 7 | 1 | 294-297 |
| 25 | BEHAVIOUR ANALYSIS OF WASTE PLASTIC SAND-BRICK | Muskan Gautam, Sajid Ali, Devesh Jaysawal | International Research Journal of Modernization in Engineering Technology and Science | 2022 | ISSN: 2582-5208 | 4 | 5 | 4510-4515 |
| 26 | Augmenting mechanical design engineering with additive manufacturing, | Ishant Singhal, Bobby Tyagi, Riya Chowdhary, Anami Saggar, Abhishek Raj, Ankit Sahai, Haniyeh Fayazfar, Rahul Swarup Sharma, | Progress in Additive Manufacturing, | 2022 | ||||
| 27 | A STUDY OF STRAW BALE IN CONSTRUCTION OF BUILDING | Ram Agrawal, Devesh Jaysawal | International Research and Development Journal in Engineering & Science | 2022 | ISSN: 2582-4201 |
1 | 1 | 17-20 |
| 28 | Mechanical Behaviour of Bamboo Reinforced Beam | Md Mozaffar Masud,A K L Srivastava, Mohd Sharique Ahmad | International Journal of Innovative Research in science, engineering and technology | 2021 | e- 2395-0056 P- 2395-0072 | |||
| 29 | Evaluating Mechanical Strength of Three Dimensional PLA printed parts by Free Form Fabrication | Pushpendra Yadav, Ishant Singhal, Dheeraj A Angazala, Ankit Sahai, Rahul Swarup Sharma | Materials Today: Proceedings | 2021 | ||||
| 30 | Effect of Varying Size of Aggregate on High Strength Concrete | Md Mozaffar Masud,A K L Srivastava, Mohd Sharique Ahmad | International Research Journal of Engineering and Technology | 2021 | e- 2395-0056 P- 2395-0072 | 8 | 3 | 1393-1396 |
| 31 | Analysis of RC Framed Structure with External Shear walls at different locations | Md Mozaffar Masud,A K L Srivastava, Mohd Sharique Ahmad | International Journal of Innovative Research in science, engineering and technology | 2021 | EISSN:23198753 | 10 | 3 | 2201-2204 |
| 32 | Evaluating Mechanical Strength of Three-Dimensional PLA printed parts by Free Form Fabrication | Pushpendra Yadav, Ishant Singhal, Dheeraj A Angazala, Ankit Sahai, Rahul Swarup Sharma, | International Mechanical Engineering Congress | 2019 | ||||
| 33 | Utilizing Ceramic Waste To Enhance Compressive Strength Of Self-Compacting Concrete |
Shailja Singh, Devesh Jaysawal | International Journal for Research in Engineering Application & Management (IJREAM) | 2018 | ISSN :2454-9150 | 4 | 2 | 624-627 |
| 34 | Use of over burn crushed Brick as Coarse Aggregate in Concrete mix |
Vikash Kumar Gautam, Devesh Jaysawal | International Journal for Research in Engineering Application & Management (IJREAM) | 2018 | ISSN :2454-9150 | 4 | 2 | 338-342 |
| 35 | Study of Strength and Durability of High Volume Fly Ash Concrete with Different Self curing agents | Sarita Sharma, Devesh Jaysawal | International Journal of Science and Research | 2018 | ISSN: 2319-7064 | 7 | 4 | 1135-1139 |
| 36 | Preferential strengthening of VMO muscle during selected biomechanical rehabilitative exercises of automotive workers with patellofemoral pain syndrome”, WORK | Greesh Kumar Singh and Sanjay Srivastava, | A Journal of Prevention, Assessment & Rehabilitation | 2018 | ||||
| 37 | Mechanical Properties Investigation of High Volume Fly Ash Concrete Cured With Synthetic and Bio Polymer as Self Curing Agent | Sarita Sharma, Devesh Jaysawal | International Journal for Research in Engineering Application & Management | 2018 | ISSN : 2454-9150 | 4 | 2 | 523-528 |
| 38 | Intensifying Hands-on Learning and Experimentation of Fused Deposition Modeling Three-Dimensional Printers | Pushpendra Yadav, Ishant Singhal, Bobby Tyagi, Ankit Sahai, Rahul Swarup Sharma | 7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference | 2018 | ||||
| 39 | Innovative Training Framework for Additive Manufacturing Ecosystem to Accelerate Adoption of Three-Dimensional Printing Technologies | Rahul Swarup Sharma, Ishant Singhal, Shivam Gupta | 3D Printing and Additive Manufacturing | 2018 | ||||
| 40 | Grip strength of occupational workers in relation to carpal tunnel syndrome and individual factors | Greesh Kumar Singh and Sanjay Srivastava, | International Journal of Occupational Safety and Ergonomics | 2018 | ||||
| 41 | Endless Runway- Orientation, Design and Calculations | Hasan Haider, Divya Rawat, Devesh Jaysawal | International Journal for Research in Engineering Application & Management | 2018 | ISSN : 2454-9150 | 4 | 3 | 278-283 |
| 42 | Electromyographic analysis of selected shoulder muscles during rehabilitation exercises | Mukesh Kumar, Sanjay Srivastava and V Soamidas | Journal of Back and Musculoskeletal Rehabilitation | 2018 | ||||
| 43 | Effects of selected rehabilitative exercises on external rotator muscles and trapezius muscles of masonry workers | Greesh Kumar Singh, Sanjay Srivastava, Mukesh Kumar and Shellyka Ratnakar, | A Journal of Prevention, Assessment & Rehabilitation | 2018 | ||||
| 44 | Effect of build orientation and infill density on mechanical properties of 3D printed parts by Fused Deposition Modeling | Pushpendra Yadav, Shashank Kapoor, Ishant Singhal, Ankit Sahai, Rahul Swarup Sharma | 34th National Convention of Mechanical Engineers, Institution of Engineers, | 2018 | ||||
| 45 | Determination of safe asymmetric lifting of hand-pump body. | R Bansal, A Gupta, S Garg, Sanjay Srivastava. | nternational Conference on Humanizing Work & Work Environment | 2018 | ISBN: 978-93-5258-836-7. | |||
| 46 | Designing safe lifting of centrifugal-pump casing in a medium scale factory in Agra. | R Bansal, D Srivastava, Sanajy Srivastava | International Conference on Humanizing Work & Work Environment | 2018 | ISBN: 978-93-5258-836-7. | |||
| 47 | Use of Plastic Waste in Concrete Mix | Mahaveer Prasad, Devesh Jaysawal | International Research Journal of Engineering and Technology | 2017 | e-ISSN: 2395-0056 | 4 | 11 | 1914-1917 |
| 48 | Partial substitution of cement by wood ash in cement production | Prabhujeet Kaur, Devesh Jaysawal | Journal Of Scientific Research And Advances | 2017 | ISSN- 2395-0226 | 2 | 1 | 450-455 |
| 49 | Evaluation of Compaction and Strength Characteristics of Expansive Soil Modified with Wheat Straw Ash and Pottery Waste | Randeep and R. K. Sharma | Recent Advances and Research Innovations in Engineering and Technology | 2017 | ||||
| 50 | Emergency Transportation | Devesh Jaysawal, Sonalika Maurya | International Journal of Scientific Research and & Development | 2017 | ISSN : 2321-0613 | 5 | 8 | 250-252 |
| 51 | A study on reuse of waste clay bricks | Sanjeet Kumar, Devesh Jaysawal | International Research Journal of Engineering and Technology | 2017 | e-ISSN: 2395-0056 | 4 | 11 | ISSN: 2395-0056 |
| 52 | A Study on Cement Stabilized Conventional Waste and Marginal Material for Pavement Layer Construction | Sarita Sharma, Devesh Jaysawal | International Research Journal of Engineering and Technology | 2017 | e-ISSN: 2395-0056 | 4 | 11 | 735-739 |
| 53 | A Research Paper On Stabilization Of Soil By Using Bituminous Material | Vikash Kumar Gautam, Devesh Jaysawal | International Research Journal of Engineering and Technology | 2017 | e-ISSN: 2395-0056 | 4 | 11 | 1870-1871 |
| 54 | Examining Role Of Aerosols In Solar Energy Resource: A Case Study From IIT Delhi Campus” | Ishant Singhal, Sagnik Dey, Somnath Baidya Roy, G.K. Taneja, V.K. Soni | 2016 | |||||
| 55 | Risk of occupational health hazard: assessment using CDSwFR and minimization using EMOwJCS. Work | Anand YK, Srivastava Sanjay, Srivastava K | A Journal of Prevention, Assessment & Rehabilitation. | 2015 | ||||
| 56 | Effects of Project Uncertainties on Nonlinear Time-Cost Tradeoff Profile | BK Pathak, Sanjay Srivastava | Iranian Journal of Fuzzy Systems | 2015 | ||||
| 57 | Integrated Fuzzy–HMH for project uncertainties in time–cost tradeoff problem. | BK Pathak, Sanjay Srivastava | Applied Soft Computing | 2014 | ||||
| 58 | Integrated ANN-HMH approach for nonlinear time-cost tradeoff problem. | BK Pathak, Sanjay Srivastava | International Journal of Computational Intelligence Systems | 2014 | ||||
| 59 | Carpal tunnel syndrome among occupational workers in India. | Singh, D., Singh, GK., and Srivastava, Sanjay | Proceedings of Human Factor and Ergonomics Society Annual Meeting | 2013 | ||||
| 60 | A hybrid evolutionary algorithm for the cutwidth minimization problem. | R Bansal, K Srivastava, Sanjay Srivastava | Proceedings of IEEE Congress on Evolutionary Computation | 2012 | ||||