Dr Ishant Singhal

Dr Ishant Singhal

Assistant Professor

Educational Qualification - Ph.D. (Mechanical Engineering) DEI , M. Tech (Atmospheric Oceanic Science and Technology) IIT Delhi, B. Tech (Mechanical Engineering) DEI

CONTACT -

Department of Civil Engineering

Faculty of Engineering

Dayalbagh Educational Institute (Deemed to be University)

Dayalbagh, Agra 282 005 (UP), India

Email: This email address is being protected from spambots. You need JavaScript enabled to view it. ,

This email address is being protected from spambots. You need JavaScript enabled to view it.

Area of Specialization - 3D printing, Additive manufacturing, and geoinformatics

Dr. Ishant Singhal is an Assistant Professor in the Department of Civil Engineering. He received his bachelor's, a doctoral degree from DEI, and a master’s degree from the Indian Institute of Technology, Delhi, India. His research interests are in 3D printing, Additive manufacturing, and geoinformatics. He is willing to take research problems in different areas. He believes that research in interdisciplinary fields has ample potential and creates wide opportunities for research. He has taught Engineering Mechanics, Structural Analysis I, Structural Analysis II, and geomatics. He has published papers in peer-reviewed journals, book series, and conference proceedings. He has also filled Indian patents. He is a member of various teams of the institute. He is also the course coordinator for MOOCs IIRS-ISRO. He has received grants from various agencies such as MoE, AICTE, and TEQIP III for R&D projects. He has received medals for securing the highest marks in B.Tech. (DEI) and M.Tech. (IITD).

PATENTS

Extruder of civil construction 3D printer for depositing concrete

Er. Ishant Singhal, Er. Suyash Goyal, Er. Ankit Jain, Er. Veer Pratap Singh, Er. Mohit Rajput, Dr Ankit Sahai, Dr Rahul Swarup Sharma

Government of India Patent Office, 202011014665, 2020, Filed

System and method to simulate 3D printer machine

Saurabh Bhardwaj, Shivam Gautam, Guru Ratan Satsangee, Er. Ishant Singhal, Dr. Ankit Sahai, Dr. Rahul Swarup Sharma

Government of India Patent Office, 488543, 26/12/2023, Granted

Foldable freeform fabricator

Er. Shailendra Shakya, Shivam Gautam, Sumit Agarwal, Saurabh Bhardwaj, Prashant Pachauri, Er. Pushpendra Yadav, Er. Ishant Singhal, Dr. Ankit Sahai, and Dr. Rahul Swarup Sharma

Government of India Patent Office, 491944, 29/12/2023, Granted

Method And System For Making Silicone Washers And Gaskets

Guru Ratan Satsangee, Saurabh Bhardwaj, Er. Ishant Singhal, Dr. Ankit Sahai & Dr. Rahul Swarup Sharma

Government of India Patent Office, 453704, 22/09/2023, Granted

PROJECTS

Title	Agency	Period	Grant /Amount Mobilized (Rs. Lakh)
MoE Virtual Labs “Concrete Technology Lab”	MoE NMEICT	2023- 25	20 Lacs
MoE Virtual Labs “Engineering Graphics Lab”	MoE NMEICT	2023-25	20 Lacs
MODROBS- Geomatics Lab	AICTE	2020-22	6.47 Lacs
Printing of 3D parts/objects using Nanocomposite materials with ultra-high properties Jointly with: Dr. CH. Shilpa Chakra Nano electronics laboratory, Centre for Nano science and technology, IST, JNT University Hyderabad, HYDERABAD - 500 085	MHRD TEQIP- III	2019-21	2.0+2.0=4.0Lacs

JOURNAL PUBLICATIONS

S.N.	Year	Title
1.	2024	Ishant Singhal, Guru Ratan Satsangee, Lakshya Bhardwaj, Gaurang S Sharma, Anand Swaroop Chandrakar, Hritav Gupta, Gargi Malik, Bobby Tyagi, Ankit Sahai, Rahul Swarup Sharma, 3D-Printing Virtual Simulation Lab, IEEE Transactions on Learning Technologies, vol. 17, pp. 1530-1543, 2024 doi: 10.1109/TLT.2024.3384556.
2.	2024	Ishant Singhal, Bobby Tyagi, Abhishek Raj, Akash Jain, Shashank Kapoor, Ankit Sahai1, Rahul Swarup Sharma, Analysis of multiple print-head displacement mechanisms in 3D space for Material Extrusion Machine, 3D Printing and Additive Manufacturing, 3D Printing and Additive Manufacturing 2024 11:5, 1787-1798 https://doi.org/10.1089/3dp.2023.0096
3.	2022	Ishant Singhal, Bobby Tyagi, Riya Chowdhary, Ankit Sahai, Haniyeh Fayazfar, Rahul Swarup Sharma, Toward an Improved Understanding for Design of Material Extrusion Additive Manufacturing Process‐ Based 3D Printers-a Computational Study, Advanced Theory & Simulation 2022, 2200704. https://doi.org/10.1002/adts.202200704
4.	2022	Ishant Singhal, Bobby Tyagi, Riya Chowdhary, Anami Saggar, Abhishek Raj, Ankit Sahai, Haniyeh Fayazfar, Rahul Swarup Sharma, Augmenting mechanical design engineering with additive manufacturing, Progress in Additive Manufacturing, 2022 https://doi.org/10.1007/s40964-022-00359-7
5.	2021	Pushpendra Yadav, Ishant Singhal, Dheeraj A Angazala, Ankit Sahai, Rahul Swarup Sharma, Evaluating Mechanical Strength of Three Dimensional PLA printed parts by Free Form Fabrication, Materials Today: Proceedings, 46 (2021) 9498–9502 https://doi.org/10.1016/j.matpr.2020.03.557 https://www.sciencedirect.com/science/article/pii/S2214785320323385
6.	2018	Rahul Swarup Sharma, Ishant Singhal, Shivam Gupta, Innovative Training Framework for Additive Manufacturing Ecosystem to Accelerate Adoption of Three-Dimensional Printing Technologies, 3D Printing and Additive Manufacturing,5(2), 170-179, 2018 https://doi.org/10.1089/3dp.2017.0003

CONFERENCE PUBLICATIONS

1.	2019	Pushpendra Yadav, Ishant Singhal, Dheeraj A Angazala, Ankit Sahai, Rahul Swarup Sharma, Evaluating Mechanical Strength of Three Dimensional PLA printed parts by Free Form Fabrication, International Mechanical Engineering Congress (IMEC-2019), 29th Nov- 1st Dec 2019, NIT Tiruchirappalli, India 2019 https://www.easychair.org/cfp/imec2019
2.	2018	Pushpendra Yadav, Ishant Singhal, Bobby Tyagi, Ankit Sahai, Rahul Swarup Sharma, “Intensifying Hands-on Learning and Experimentation of Fused Deposition Modeling Three-Dimensional Printers”, 7^th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, 2018, Anna University, Chennai https://easychair.org/cfp/aimtdr2018 https://www.mypadnow.com/aimtdr2018
3.	2018	Pushpendra Yadav, Shashank Kapoor, Ishant Singhal, Ankit Sahai, Rahul Swarup Sharma, “Effect of build orientation and infill density on mechanical properties of 3D printed parts by Fused Deposition Modeling”, 34^th National Convention of Mechanical Engineers, Institution of Engineers, 7-8^th Sept, 2018, New Delhi http://www.ieidsc.in/reports/2018%2009%2007%2008%20report%20mechnical%20convention.pdf
4.	2016	Ishant Singhal, Sagnik Dey, Somnath Baidya Roy, G.K. Taneja, V.K. Soni. “Examining Role Of Aerosols In Solar Energy Resource: A Case Study From IIT Delhi Campus”, IASTA 2016, Physical Research Laboratory, Ahmedabad, India, 6-8 Dec., 2016

BOOK CHAPTERS

2020

Pushpendra Yadav, Ishant Singhal, Bobby Tyagi, Ankit Sahai, Rahul Swarup Sharma. (2020) Intensifying Hands-on Learning and Experimentation of Fused Deposition Modeling Three-Dimensional Printers. In: Shunmugam M., Kanthababu M. (eds) Advances in Additive Manufacturing and Joining. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, 309-317

https://link.springer.com/chapter/10.1007/978-981-32-9433-2_27

https://doi.org/10.1007/978-981-32-9433-2_27

https://drive.google.com/file/d/1FDdf0QpSwAvw5HIP0mzGWX0VoRTuurMv/view?usp=sharing

STUDENTS GUIDED

03 PhD (Ongoing)

Guided 03 M.Tech. dissertation and 08 B.Tech. dissertaions.

WORKSHOP /COURSES ATTENDED

Participated in 5-day online FDP on “Inculcating Universal Human Values in Technical Education” organized by AICTE from 31st Jan. 2022 – 4th Feb. 2022.
Participated in subject Refresher Course in Environmental Studies from 25^th 2021 – 09th Nov. 2021 organized by UGC HRDC, Aligarh Muslim University, Aligarh.
Participated in national Webinar on “Using Tools to prevent plagiarism in Higher education by K. J. Somaiya College of Science and Commerce in collaboration with Turnitin on 30th July 2021.
Completed NNRMS course on “RS and GIS technology and applications (online-mode)” conducted by IIRS, Dehradun during 07th -24th June 2021.
Completed “Module 1: Orientation Towards Technical Education & Curriculum Aspects” of NITTT, AICTE.
Completed “Module 2: Professional Ethics & Sustainable Development” of NITTT, AICTE.
Completed “Module 3: Communication Skills, Modes and Knowledge Dissemination” of NITTT, AICTE.
Completed “Module 4: Instructional Planning and Delivery” of NITTT, AICTE.
Completed “Module 5: Technology Enabled Learning and Life-Long Self Learning” of NITTT, AICTE.
Completed “Module 6: Student Assessment and Evaluation” of NITTT, AICTE.
Completed “Module 7: Creative Problem Solving, Innovation and Meaningful research and development” of NITTT, AICTE.
Completed “Module 8: Institutional Management and Administrative Procedures” of NITTT, AICTE.
Attended AICTE & MRSPTU approved 6-Day Online Short-Term Training Programme on "Climate Change & Water Security" from 1st February to 6^th February 2021, organized by the Department of Civil Engineering, Giani Zail Singh Campus College of Engineering & Technology MRSPTU, Bathinda (Punjab).
Participated in the Online Faculty Development Program, Outcome Based Engineering Education and Accreditation (OBEEA 2020), sponsored by TEQIP-III, organized by NIT Meghalaya during 21st-23rd September 2020.
Participated in “SummitConnect” jointly organized by SPIU-UP and SPIU-karnataka in BMS college of engineering, Bengaluru on 8th – 9th November 2019.
Attended Twinning workshop on 30th and 31st May 2019 organized by state project implementation unit-UP.
Participated in Orientation Programme from 04 September 2018 – 01 October 2018 organized by UGC HRDC, AMU, Aligarh
Attended 5 Day FDP on Summer Training Programme for Active Learning for Senior Faculty organized by IIT Kanpur, From 21-25 MAY 2018
National Level workshop OBSERVATIONAL AND COMPUTATIONAL TOOLS FOR NOWCASTING (OBSCON 2017) organized by Air Force Administrative College (AFAC), Coimbatore from 15 May to 26 May 2017.

PAPERS PRESENTED

Presented paper in conference (MDNCPDR 2018) entitled “Limitation of 3D printing” on 6th and 7th Sept. 2018 organized by DEI.
Presented paper in conference entitled “Futuristic Manufacturing @ DEI” on 23^rd 2019 organized by DEI.
Presented paper in International conference (HUMPEAR 2023) entitled “Application of additive manufacturing in construction during COVID-19” on 7^th November 2022 organized by DEI

WORKSHOP ORGANIZED

“3D Printing Workshop” at IST, JNTU, Hyderabad from 21 Mar. to 25 Mar. 2019.

INITIATIVE

Development of Geomatics Lab under TEQIP III at Dayalbagh Educational Institute, Agra

Course Coordinator for MOOCs IIRS-ISRO – 26 in no.

AWARDS AND HONORS

Invited Speaker in Two-day workshop on 3D printing from 15th March 2019 -16th March 2019 organized by IST, JNTU Hyderabad.
Ganga Devi and Khem Chand Memorial Award for securing highest CGPA in the M.Tech. in Atmospheric- Oceanic Science and Technology in 2017.
Director's medal for securing highest CGPA in B.Tech. in 2015.

Director's medal for securing highest marks in Comparative study of religions and Cultural Education in 2015.